|
NOTE: For orders outside of the continental United States you must add international shipping charges to your order
|
| International Shipping Fee $20 | |
|
 | Mugen MRX4-X brass battery tray
Mugen MRX4-X Brass battery tray (weight 55 GRAMS) This item significantly lowers the CG of your MRX4-X and brings the total weight of the car much closer to the ROAR minimum weight. | $44.99
|
 | Mugen MTX4R Brass battery tray 43 grams
This replaces the stock battery tray and lower the center of gravity improving the handling of the car. | $39.99
|
| Mugen MTX4R Brass battery tray 60 grams
This replaces the stock battery tray and lower the center of gravity improving the handling of the car. | $39.99
|
 | MTX4-R Lite-weight billet aluminum 1-piece front spool
7075 billet 1-piece front spool. Weighs only 12 grams. You need to apply anti-sling grease to dogbone slots regularly to prolong spool life. | $39.99
OUT OF STOCK |
 | 70-75 Lite-weight midshaft Mugen MTX4-R
This lite-weight midshaft weighs in at 3 grams which is less than half the weight of the stock midshaft and is made of 70 75 aluminum. | $12.99
|
 | MTX4-R Aluminum Chassis Brace
This brace stiffens the rear of your MTX4 reducing gear stripping flex. Aircraft aluminum with natural finish (not black like pictured). This replaces the stock plastic brade on the gear side. | $11.99
|
 | MRX4-X Billet Rear Body Post
Billet rear body post designed to be used with YB-0086 ultra lo front post to really slam your 909 or Zytec body. | $10.99
|
 | Lite-weight MRX4-X Front axles Stainless Steel V3
Liteweight MRX4-X Front axles to be used with Mugen CVD's. These are 2.5 grams per axle lighter than stock. Slots slightly different than pictured for improved strength and further wheight reduction.
| $59.99
|
 | Liteweight MRX4-X Rear axles Stainless Steel V3
Lite-weight MRX4-X Rear axles to be used with Mugen CVD's. These are 2.5 grams per axle lighter than stock. Slots slightly different than pictured for improved strength and further wheight reduction.
| $59.99
|
 | Ultra Stiff Billet Delrin Front Body Mount (.187) thick
This body mount is 99% as stiff as the carbon fiber mount and weighs only 3 grams more. The advantage is it is as stiff as the carbon fiber (more steering than stock plastic mount) but no where near as brittle. | $14.99
|
 | MRX4-X Billet Front Upper Arm Hangers
MRX4-X Billet Front Upper Arm Hangers with optional roll center location. These arms are 3mm lower roll center than the stock location. Use 3mm shims and you will be back at stock height. The upper arm is moved out about 2mm which translates into a huge amount of steering and makes the car feel much more aggressive. | $49.99
|
 | MRX4-X Litewwight 70-75 Midshaft
7075 lit-weight midshaft weighs less than half of the stock part. | $14.99
|
| Stiff Billet Delrin front body mount (.125) Thick
Much stiffer than stock plastic nd no where near as brittle as the carbon fiber mount. This piece weighs the same as the carbon fiber mount, but not quite as stiff. | $13.99
|
 | MRX-4X Titanium 2 Speed Shaft
This Titanium 2 speed shaft for the MRX-4X weighs 14 grams which is 40% less than the stock shafts weight. Made from American 6AL-4V the stongest grade Titanium made. | $28.99
|
 | Mugen Magnesium Ultra Lite Pulley Adapter
These pulley adapters are made from ultra lite Magnesium and weigh a little over 1 gram which is less than 1/3 of the stock pulley adapters weight and will fit the MRX and MTX platforms. (Magnesium brake pulley coming soon). | $14.99
|
 | MTX4-R Titanium Midshaft
40% Lighter than stock and just as strong | $14.99
|
 | Mugen MRX4-X Lite-weight Front 1-way
This is the FRONT 1-WAY axle for the MRX4 vehicles. It is made from 70-75 aluminum and uses the best quality 1-WAY bearings available. This axle is 6 grams lighter than the stock axle. | $44.99
OUT OF STOCK |
| MRX4-x Titanium Midshaft
MRX4-X Titanium midhaft 40% lighter than stock. Made from American 6al-4v titanium. | $14.99
|
 | MRX4-X Delrin-H-Arm V3 with 6.5mm and 10mm rise for rear body mount
Billet Delrin H-Arm with 6.5mm amd 10mm taller than stock settings available on this latest revision to the rear body mount h-arms. These re designed to be used with the newer generation 1/8th scales bodies. Each arm weighs in at 3 grams now wich is half the version 1 aluminum h-arms.
| $24.99
|
 | Ultra Low Billet Front Body Post
MRX4-X ultra low front post. Designed to slam the 909 body and designed to be used with YB-0087 rear billet post. | $11.99
|
 | MRX4-X Fuel Tank Lever
Make quicker pitstops with this billet fuel tank lever. | $8.99
|
 | MRX4 H-Arm Retainer Collars
MRX4 H-Arm Retainer Collars replace the stock collars with these billet aluminum collars which match the ybslow body posts and fuel tank lever. | $15.99
|
 | MTX4-R Billet 3rd Front Body Post
MTX4-R Billet 3rd Front Body Post makes the body stiffer in the front. | $9.99
|
 | MRX4-X Centering Bracket (rear body mount)
This is the centering bracket for the rear body mount of the MRX4-X. Billet aluminum designed to be used with the aluminum H arms to make the body taller and have less play in the body mount assembly. | $24.99
|
 | MRX4-X Lite-Weight Stainless Steel 2-Speed-Shaft (fits MRX4-X)
This is a hollow stainless steel 2-speed shaft for the MRX4-X. Stronger than the solid titanim axle and 10 grams lighter than the stock steel shaft. | $28.99
|
 | Lite-weight Billet Aluminum Pulley Adapters
These pulley adapters are made from billet aluminum and weigh half of what a stock pulley adapter weighs. These pulleys have been triangulated to remove all excess weight. | $14.99
|
For orders outside of the continental United States please contact us at info@ybslowinc.com for shipping rates and payment instructions. |
